| VGA Switch |
Slew rate: |
1100V/?gs |
Bandwidth: |
250MHz (@ -3dB) |
Gain Matching: |
R to G to B: 0.10dB |
|
Input 1 to Input 2: 0.01dB |
Input: |
2-channel standard VGA signal |
|
Connectors: DB-15 (female) x 2 |
Output: |
2-channel synchronized VGA signal |
|
Impedance: 75 ohms |
|
Connectors: DB-15 (female) x 2 |
Audio Switch |
Cross-talk: |
-75 dB |
Channels Isolation: |
-80 dB |
Input: |
7-channel stereo inputs |
|
Connectors: Composite Stereo (female) x 7 |
Output: |
3-channel synchronized outputs: |
|
Connectors: Composite Stereo (female) x 3 |
Video Switch |
Cross-talk: |
-60 dB (@ VIN=1Vpp: f=3MHz) |
Channels Isolation: |
-75 dB |
Voltage Gain: |
6 dB (@ 1MHz: VIN=1Vpp) |
Bandwidth: |
10MHz |
Input: |
7-channel composite inputs |
|
Connectors: Composite (female) x 7 |
Output: |
3-channel composite outputs |
|
Connectors: Composite (female) x 3 |
Power Amplifier |
Power: |
50W + 50W (@ 8 ohms) |
Total Harmonic Distortion |
<0.2% (@ 1kHz, 10W, 8 ohms) |
Signal to Noise Ratio |
75 dB |
Frequency Response: |
20 Hz ?20 kHz,?2dB |
Mic. Input Sensitivity: |
20 mV |
Infrared Control |
Reception Frequency: |
15 kHz-50kHz(infrared) |
Reception Error: |
<5% |
Memory Size: |
256 codes |
Transmission Range: |
>3 meters |
General |
Power Requirements: |
100-115/ 230 V |
Power Consumption: |
120 W |
Dimensions |
With mounting bracket: 482 mm(W) x 87 mm(H) x 245 mm(D) |
|
Without mounting bracket: 440 mm(W) x 87 mm(H) x 245 mm(D) |
Gross Weight: |
8.8 kg |
Operating Temperature: |
0°C-40°C (32°F-104°F) |
Operating Humidity: |
5% - 90% |
Storage Temperature: |
-20°C-55°C (-4°F-130°F) |
Supplied accessories: |
1 x VGA cable
1 x RS-232 cable
2 x Stereo 3.5mm splitter cable (1 x 3.5mm male to 2 x 3.5mm female)
2 x Infrared transmitter with cable and jack
1 x Power cord |