| |
|
| |
 |
| |
|
Empfänger-Hub
|
 |
Power Requirement |
DC 12V, 4A Switching Power Adapter |
RS-232C Port |
Serial Port to computer |
RJ_45 Data Port x 8 |
RS-485 Data Port to IR Receiver |
|
| |
|
Empfänger
|
|
Dimensions |
126mm x 63mm x 25mm |
Power Requirements Current |
DC 9V, 800mA Power Adapter |
Infrared Signal
- Receiving Angle
- Receiving Distance |
IR receiving angle < 250° Cable Length < 15 metres |
RJ-45 Data Port |
Data Communication Port with power
Cable Length < 30m
Cable specification: UTP Cat.5 with 568A standards cable |
Optional module |
Extension Receiver to extend the coverage of signal reception and transmission |
|
| |
|
Hansender - Instrukteur
|
|
| Dimensions |
105mm x 51mm x 15mm |
Key Buttons |
24 |
Battery Requirement |
Battery Size "AAA" 1.5 volt x 2 |
Infrared Signal |
< 15 metres transmission distance |
WDT Reset |
Support Automatic Program Reset Feature |
| Power Saving Mode Current |
Enter Power Saving Mode within 5 sec when the remote is left idle < 3 uA |
Operation Mode Current |
< 4 mA |
Laser Center Wavelength |
650nm |
| Laser Output Power |
5mW |
|
| |
|
Handsender - Teilnehmer
|
|
| Dimensions |
105mm x 51mm x 15mm |
Key Buttons |
7 |
Battery Requirement |
Battery Size "AAA" 1.5 volt x 2 |
Infrared Signal |
< 15 metres transmission distance |
WDT Reset |
Support Automatic Program Reset Feature |
| Power Saving Mode Current |
Enter Power Saving Mode within 5 sec when the remote is left idle < 3 uA |
Operation Mode Current |
< 4 mA |
Laser Center Wavelength |
650nm |
| Laser Output Power |
5mW |
|
| |
|
| |
 |
| |
|
|
