Power Requirement
Receiver hub is not required
DC 12V, 4A Switching Power Adapter
RS-232C Port
Serial Port to computer
RJ_45 Data Port x 8
RS-485 Data Port to IR Receiver
Dimensions
Diameter : 90.9mm
126mm x 63mm x 25mm
Power Requirements Current
USB (external power supply is not required)
DC 9V, 800mA Power Adapter
Signal - Receiving Angle - Receiving Distance
360¢X 20/100M
IR receiving angle < 250¢X Cable Length < 15 metres
USB Cable
USB to Mini-USB
RJ45 Data Port Data Communication Port with power Cable Length < 30m Cable specification: UTP Cat.5 with 568A standards cable
131mm x 68 mm x 15mm
105mm x 51mm x 15mm
Key Buttons
13
24
Battery Requirement
Battery Size "AAA" 1.5 volt x 2
Infrared Signal
20/100 metres transmission distance
< 15 metres transmission distance
WDT Reset
Support Automatic Program Reset feature
Support Automatic Program Reset Feature
Power-saving mode is switched on within 10 minutes
Power-saving mode is switched on within 5 seconds when the remote is left idle < 3 uA
Laser Center Wavelength
650nm
5mW
7
